BLEMISHED - Bolt-on Adapters

* IMPORTANT *

BLEMISHED items ARE NOT eligible for returns or warranty claims

Please ensure you are ordering the correct adapter.

Returns from blemished orders will NOT be accepted

Blemished items have cosmetic damage

Such as minor paint defects, scratches, dents, and/or manufacturing defects (machining marks or laser cutting defects)

Blemishes do not affect the functionality of the equipment

Only the appearance is affected

Availability will vary

Sold out means no blemished kits are available for that type

Fitment Guide:

• RG 2.0 180° adapter is compatible with the newer/current Rogue lever arm that has the square front section and the locking key. This adapter works on both 1" and 5/8". 

• RG 1.0 - 1" M 180° adapter is compatible with the older/discontinued Rogue 1" monster lever arms that have the triangle front section and DOES NOT have the locking key. 

• RG 1.0 - 5/8" ML 180° adapter is compatible with the older/discontinued Rogue 5/8" monster lite lever arms that have the triangle front section and DOES NOT have the locking key. 

• SX 180° adapter is compatible with the old/discontinued Sorinex lever arms (pre-2023) with the spring-loaded locking pin on the side of the trolley

*Please see the respective product page for full details*

* LEGAL DISCLAIMER *

Vendetta Strength & Athletics is an independent company and has no affiliation with any other company.

We are not affiliated, associated, authorized, endorsed by, or in any way officially connected with Rogue, REP, Titan, Sorinex, or any company referenced that is the legal trademark owner of the product name, logo, brand, and/or other trademark depicted or referred to within.

Any reference to them is strictly for descriptive nominative identification purposes ONLY as we sell aftermarket adapters and parts that are compatible with many brands/models. 

All Kits Include

• Complete kit for both lever arm trolleys (1 set of adapters per trolley, 2 total)
• High Strength Hardware
• QR code assembly instructions

NOT Included

• Hitch Pins NOT included
  • Must be purchased elsewhere
  • A minimum 5" usable shaft length is required
• Lever arms and trolleys NOT included, bolt-on adapter mounts ONLY

WARNINGS

The adjusting pin and brackets are ONLY meant for supporting static loads and controlled stops at the end of a repetition. They should NEVER be used for dropped weights or as a dynamic spotter as damage to your squat rack upright will occur from dropping weight.

DO NOT exceed 200 lbs static load on each lever arm when supported by the adjusting pin. When the adjusting pin is not in use, the load rating is the same as the original manufacturer’s specs.

ONLY use this attachment on squat racks that are properly anchored to the floor or wall per the original manufacturer's instructions as tipping due to the extended loads can occur. Similar to spotter arms when used outside the rack.

ALWAYS use an additional hitch pin inserted laterally through both sides of the original bracket and the squat rack upright post thus acting as a locking cross pin. This allows the additional forces from the extended arms to be supported by the inserted hitch pin and not the roller bolts.

NOT recommended for commercial facilities or applications

IMPORTANT

As with all equipment, these should only be used for their intended purpose. We cannot stress this enough.

This product should NEVER be used as spotter arms or for replacing spotter arms for dropped weight and is ONLY meant to be used to set the starting/resting position of a given exercise using controlled stops at the end of the rep.

ALWAYS use an additional hitch pin inserted through the trolley mount and upright post. Failure to follow this instruction can damage the upright post.

Due to the physics involved when the weight is extended away from the rack and the increased risk of tipping this product should ONLY be used on equipment that is properly anchored to the floor or wall. Every rack should always be properly anchored per the original manufacturer's instructions. Failure to follow this can result in serious injury or death.

Failure to acknowledge any of these warnings can result in serious injury.

By purchasing this product and checking the consent box during checkout the user(s) acknowledge that they have read, fully understand, and agree to follow all of the provided warnings/requirements and that Vendetta Strength and Athletics is not liable in any way for any damage, personal injury, or injury caused by the use and/or misuse of this product.

As always, please exercise safely and responsibly.