Vendetta 180° Adapters for RG 2.0 Lever Arms (Pair)

DESCRIPTION

Turn your boring lever arms into the most versatile piece of equipment in your home gym with our patent-pending 180-degree bolt-on adapter mounts!

Our bolt-on adapters attach seamlessly onto your existing lever arm mount and instantly add endless potential for new exercises.

The 180° adjustability and 15 positions allow you to set the starting angle of the lever arm so you can perform endless new exercises such as flat presses, incline presses, decline presses, hammer presses, shoulder presses, rows, calf raises, leg curls, leg extensions, various squats, hip thrusts, and several other exercises. 

NOTE

Due to the existing locking key design, the 2.0 RG adapters are not capable of aligning the holes in the lever arm tube with the side plate holes for locking out the arms into a fixed position with the adapters using a pin inserted through both. The location of the key hole in the lever arm unfortunately prevents this from being possible without an extremely oversized and obnoxiously large diameter plate. This lockout function is rarely used however, and does not affect overall performance. 

FEATURES

• 180° degrees of adjustability and possibilities 
• 15 equally spaced 5/8” hole for adjustable positions/angles
• Seamlessly attaches onto the existing mount with the included hardware
• 5/16” (0.3125”) thick CNC laser-cut steel side plates
• Matching Black Powder Coat

INCLUDES

• Complete kit for 2 sets of lever arms (1 set of adapters per side, 2 total)
• High Strength Grade 8 replacement hardware
• QR code assembly instructions

These adapters use a 5/8" hitch pin as the adjusting pin.

You will NEED two 5/8" hitch pins (not included) that are a minimum 5" long for these mounts. Using a 5/8" hitch pin allows for 15 adjustment points instead of only 9. 

NOT Included

• Hitch Pins NOT included (minimum 5" usable shaft length required)
• Lever arms and trolleys NOT included, bolt-on adapter mounts only

WARNINGS

• NEVER use for dropped weights or as a dynamic spotter arm/device! Damage to your squat rack upright will occur from dropping weight. The adjusting pin and brackets are ONLY meant for supporting static loads and controlled stops at the end of a repetition.
• DO NOT exceed 250 lbs static load per individual arm for 36" arms and 200 lbs for 48" arms when supported by the adjusting pin. When the adjusting pin is not in use, the load rating is the same as the original manufacturer’s specs. Failure to follow this will result in a damaged lever arm tube.
• ONLY use this attachment on squat racks that are properly anchored to the floor or wall per the original manufacturer's instructions as tipping due to the extended loads can occur. Similar to spotter arms when used outside the rack.
• ALWAYS use an additional hitch pin inserted laterally through both sides of the original bracket and the squat rack upright post thus acting as a locking cross pin. This allows the additional forces from the extended arms to be supported by the inserted hitch pin and not the roller bolts.
• NOT recommended for commercial facilities or applications
• Failure to acknowledge any of these warnings can result in serious injury. By purchasing this product and checking the consent box during checkout you acknowledge that you have read, understand, and agree that Vendetta Strength and Athletics is not liable in any way for any damage, personal injury, or injury caused by the use or misuse of this product. As always, please exercise safely and responsibly.

By purchasing, the user(s) acknowledges and agrees to follow these warnings and to use responsibly. Vendetta Strength and Athletics is not responsible for any damage as a result of improper use or failure to follow any/all warnings given.

DISCLAIMER

Vendetta Strength & Athletics is an independent company and has no affiliation with any other company in any manner.

This product is designed to be compatible with the ROGUE® 2.0 Monster Trolley. Rogue is not affiliated with Vendetta Strength & Athletics and has not approved any Vendetta Strength and Athletics products for use with Rogue’s products. ROGUE® is a registered trademark of Coulter Ventures, LLC d/b/a Rogue Fitness.

Vendetta Strength is not affiliated, associated, endorsed by, or in any way officially connected with Rogue or with any other company mentioned that is the registered trademark owner of the product name, logo, brand, and/or other registered trademarks depicted or referred to within. Any reference to them is strictly for descriptive and nominative identification purposes only.

WARRANTY
We strive to design products that will last forever, but parts inevitably wear out over time and heavy use. This is why all of our parts and components (i.e. rollers, brackets, hardware, etc.) are covered by our lifetime structural warranty. As long as we're in business, your product will be supported. We are committed to standing by our products and customers for the long haul.

PROUDLY BUILT IN AMERICA (Chattanooga, Tennessee) by a small family business